1930 EL / 1930 Digit
- Check fuse in the house
- Check warning lights / display for error message
When warning of a full bag - press and hold the "reset" button for approx. 5 seconds.
Upon notification of service - delivered to the nearest workshop
- Insert the vacuum hose 90 degrees into the suction socket.
Vacuum cleaner starts - suction hose fault.
The vacuum cleaner does not start - the fault is in the pipe system or the vacuum cleaner unit.
- The vacuum cleaner unit can be tested by setting the "auto / manual" switch to manual.
Vacuum cleaner starts - faulty pipe system.
Vacuum cleaner does not start - vacuum cleaner unit failure.
- If the vacuum cleaner still does not start, contact the nearest workshop:
- Check that the pipes, suction hose and exhaust are not blocked / clogged
- If the fault persists, contact the nearest workshop:
- Start the vacuum cleaner, disconnect the hose/pipe on the vacuum cleaner unit. Check the suction directly on the vacuum cleaner unit.
Good suction on the vacuum cleaner unit - Clogged in pipes or suction hose.
Poor suction on the vacuum cleaner unit - Check bag and filter on vacuum cleaner.
- Still poor suction - Delivered to the nearest workshop
Suction hose fault - Replace suction hose
- Contact the nearest workshop