HPE
EUR 4 253,21
Ind. price: EUR 7,100.82
Technical data
Item number: APTA40015 |
EAN-nr: 7050485400157 |
Opprinnelsesland: |
Tolltariff: |
Pressure: 8-10 bar |
Flow rate: 3-8 ltr/hour |
Voltage: 230 /10 V-Amp |
Absorbed power: 0,6 kW |
Weight: 55 kg |
Dimensions: 53x50x127 cm |
Product information
Produktinfo.IPC’s HighPure is based on the latest technology in water purification and designed to meet two basic needs: the need to reach windows at significant height without having to use a ladder or scaffolding and the need for perfect cleaning results without the use of cleaning agents. The HighPure system can reduce cleaning time to as little as 75 percent of the cleaning time with conventional methods. Operators are able to clean more than 200 m2 of window area in just one hour (experienced operators), and labour cost savings are enormous. HighPure cleans not only windows, but all non-porous surfaces (e.g. metal). The windows are also perfectly cleaned and remain crystal clear longer as no chemicals or salt are left that may form stains when the windows dry.
Thanks to reduced water consumption and elimination of all potentially polluting chemical products, it is possible to clean windows while still taking the environment into account. As no cleaning agents are used, the wastewater from the HighPure system can be used to water plans or simply poured away into a public drain.
HighPure makes cleaning windows completely non-hazardous. The equipment is handled from the ground and does not require the use of ladders, scaffolding or platforms. With extension rods, operators can easily reach windows high up even
above obstacles such as lawns, shrubs and urban decoration.
Water from the pipe network passes through special filter units and is purified to 99.99 percent. After undergoing osmosis and deionisation, the cleaning water is a very effective cleanser. The clean water, aided by the mechanical action of the movable brush on the end of the rod, tears loose and carries away all particles. The surface can then be cleaned so that it is completely free of stains. When it dries, the clean water does not leave marks or stains (and the cleaner the water, the lower the level of dissolved salt).
HighPure uses the most efficient water purification system on the market. The system consists of four cleaning steps:
1. A sediment pre-filter removes suspended particles of more than 5 micrometres.
2. Active charcoal filters remove all traces of chlorine (chlorine can also damage the reverse osmosis membrane).
3. A reverse osmosis membrane eliminates 98 percent of all salts and other impurities.
4. A deionising filter with a resin cartridge removes the remaining two percent salt and reduces the salt concentration to 0 ppm (parts per million).
HighPure is easy to manoeuvre and easy to transport. The robust wheels on the trolley allow the trolley to move quickly and easily. Some models allow two operators to use a cleaning rod at the same time so that productivity is doubled. The HighPure system includes a wide range of accessories designed to achieve efficient cleaning in all conditions.